Portable Mixing Tanks

Mixing Tanks on Lift Tubes Models PTA-LT2 and PTA-LT4 Flat Or Sloping Bottom 2- or 4-Way Fork Lift Tubes Top Reinforcing Ring Stainless Or Carbon Steel Drain Coupling Flush With Bottom Choice Of Lift Tubes Or Legs Options Heating Cooling Jackets Pipe Heating Jackets Sanitary Finishes Up To 240 Grits Covers, Steel Or Aluminum 4-Wheels In Addition To Lift Tubes
Mixing Tanks, Lift Truck Model PTA-LT2 Capacity up to 600 gallon 2-way fork lift Flat or sloping bottom Stainless or carbon steel Drain coupling flush with bottom Lifting hooks Options Covers, aluminum, stainless, carbon steel Sanitary finish up to 240 grits Heating/cooling jacket Model shown: PTA-LT2-375-SS
Mixing Tanks, Lift Truck Model TMS-LT4 Capacity up to 800 gallon 4-way fork lift Flat bottom, flanged Stainless Drain coupling flush with bottom Lifting hook, type D Internal sanitary polish, 240 grit Options Covers, aluminum, stainless Heating/cooling jacket Model shown: TMS-LT4-650-SS-240G
Mixing Tanks on Wheels Models TOW and TO4W 3-Wheels With Steering Bar 4-Swivel Wheels Flat Or Sloping Bottom Stainless Or Carbon Steel Gray Iron Wheels With Roller Bearings Drain Coupling Flush With Bottom Options Heating/Cooling Jacket Pipe Heating Jacket Sanitary Finishes Up To 240 Grits Choice Of Wheels In Gray Iron, Polyurethane, Phenolic, Stainless Steel Wheel Brakes Covers, Steel Or Aluminum Lift Hooks (OSHA)
Mixing Tanks on Wheels and Lift Tubes Model TOW-LT Carbon Steel, Aluminum, Stainless Steel With Total Polishing & Finishing Capabilities 4-Wheels, Swivel, Steering Handle Sloping Bottom Polymeric Spark Resistant Wheels 2-Way Fork Lift Tubes Aluminum Hinged Cover with Mixing Shaft Slot
Mixing Tanks On Wheels Model TO4SW-575-SS Side Mounted Wheels For Maximum Stability 4-Wheels Swivel, Steering Handle Flat Bottom, Reinforced CS Plate Stainless Type 304, Shell & Bottom Top Reinforcing Ring, Carbon Steel Gray Iron Wheels, Roller Bearings 3" Drain Coupling Flush with Bottom All inside welds ground smooth 5" Floor Clearance Carrying Capacity: 8000 lbs. max
Mixing Tank Model PTA-LT-240-CS-FD F&D (flanged & dished bottom) Lift tubes Features Capacity, max. 440 gal Materials: carbon steel Lift tubes, 7” x 3” on 28” center Sloping bottom, 4” Ball valve: 2”, at drain Diameter: 52” Straight section: 48” Top ring, FB: 3/8” x 3” Shell thickness: 10 ga F&D bottom thickness: 3/8” Hose bracket, right side Inside welds, ground smooth Outside paint, gray enamel Product viscosity: 100k cps Heavy duty construction Options Valve guard, 10 ga. Air Mixer Covers (several designs available) Choice of materials
Mixing Tank with Lift Tubes and 15 psig Jacket Model PTA-LTJ-350-SS-SB Features Capacity, max. 350 gal Materials: Stainless Steel, type 304 Lift tubes, 7” x 3” on 28” center Sloping bottom, 4” Ball valve, drain: 2” Diameter: 50” Straight section: 42” OAH: 47” Top ring, angle: 2”x2”x1/4” Shell thickness, outer: 12 ga Shell thickness, inner: 10 ga Bottom thickness: 10 ga. Jacket with spirals: 15 psig Inside welds, ground smooth Outside 2” insulation, 900 degrees F, fabric & white cement coating, (not shown) Product viscosity: 10k cps Heavy duty construction Options Valve guard, 10 ga., SS304 Mixer, Series 5016, Model DTE-020-380-SS, tank mounted, fixed speed 380 rpm, 2 HP TEFC gear motor, 3/60/460V, 12” turbine type VHE Lid, 1” lip ring, hinged one side, mixer entry slot, SS304 Choice of materials
Mixing Tank Model PTA-LT-440-CS-SB Features Capacity, max. 440 gal Materials: carbon steel Lift tubes, 7” x 3” on 28” center Sloping bottom, 4” Ball valve: 2”, at drain Diameter: 52” Straight section: 48” Top ring, FB: 3/8” x 3” Shell thickness: 10 ga Bottom thickness: 3/8” Inside welds, ground smooth Outside paint, gray enamel Product viscosity: 100k cps Heavy duty construction Options Valve guard, 10 ga. Mixer Covers (several designs available) Choice of materials