Prices - High Speed Disperser Blades

From the Dantco Blade Factory
[Product Info]

Blade Dia. (in.)	Center Hole (in.)	HSF High Shear	HSG High Vane	HSE High Turbo	HSD High Shear 4 Rings	HSD High Shear 2 Rings	HSD High Shear Poly
1	.187	$96.50
2	.375/.187	58.20	$56.20	$62.00			$115.00
3	.375/.187	60.00	60.50	66.50	$350.00	$200.00	120.00
4	.500	72.00	73.50	68.50	385.00	252.00	150.00
5	.500	82.00	88.00	105.00	395.00	285.00	195.00
6	.500	96.00	99.50	116.00	415.00
8	.625	116.00	118.00	152.00	443.00		350.00
10	.625	137.00	141.00	168.00	618.00		425.00
12	.625	145.50	152.75	198.00	675.00		480.00
14	.625	168.00	178.00	196.00	727.00		495.00
16	.625	186.00	192.00	227.00	743.00		562.00
18	.625	198.50	211.00	261.00	790.00		585.00
20	.625	230.00	245.00	275.00	855.00		693.00
22	.625	252.00	273.00	295.00	992.00		799.00
24	.625	304.00	322.00	348.00	1215.00		990.00
26	.625	343.00	363.00	428.00	1480.00
28	.625	385.00	415.00	485.00	1693.00		TBD
30	.625	455.00	496.00	585.00	1820.00
32	.625	510.00	550.00	696.00	2262.00
34	.625	668.00	698.00	760.00
36	.625	698.00	735.00	810.00

Hubs for 2” to 8” blades, add $45.00 to $120.00. Mixing shafts, threaded end, 3/8” dia. x 12” @ $80.00, ½” x 12” @ $98.00. Mixing shafts, plain, 3/8” dia. x 12” @ $55.00.

Quantity Discount (any combination): 3 units and above 10%, 10 units and above 15%.

All prices are FOB Paterson, N.J. Delivery from stock on most units.

Standard boring, drilling, keying are included in prices.

These blades have standard thickness of 1/8”. Most blades may have optional thickness of 3/16” and ¼” (HSG) at extra cost. HSG blades in ¼” thickness will outlast any Poly-blade.

Standard metal is SS304. For SS316 add 40%. Poly units are non sparking moderate temperature materials (150 °F).

Hard Chrome or Plasma Spray are optional on SS units. These coatings are usually applied near the edges only, where it is susceptible to wear.

Blade Holding Plates are recommended for blades 6" and larger. Plates are usually 2" to 3" smaller than blade diameter. (See price sheet for Blade Holders.)

Most of the above blades may be mounted on stainless steel hubs with set screws for easy installation on dispersing shafts. See separate price lists for these items.

Prices and specifications may change without notice. Contact us for latest prices and delivery.

Feb 2007